Pandaboard on Eclipse

目的
在Pandaboard開發Android時，理想是透過Eclipse直接將apk放在Pandaboard上執行。由於在初始時是無法透過USB判定到Pandaboard，需先從SDK Manager中下載Google USB Driver，再將驅動裝上才能抓到Pandaboard。

方法

• On Ubuntu (12.04):
• Change the mode to debug in our Android
• Open the terminal
• Enter the vendor ID to adb_usb.ini (一定要進入super user模式)
  

  $ sudo su 
  <psswd> 
  $ mkdir ~/.android 
  $ vi ~/.android/adb_usb.ini 
  $ echo "0x0451" > ~/.android/adb_usb.ini 
  $ cat /root/.android/adb_usb.ini 
  0x0451

• Restart the adb
  

  $ cd <path>/android-sdks/platform-tooles 
  $ ./adb kill-server 
  $ ./adb start-server
  

• Check the devices
  

  $ ./adb devices

• We can get the Pandaboard platform successfully.
• On Windows:
• 開啟cmd介面
• 鍵入以下指令
  

  > echo 0x0451 > "%USERPROFILE%\.android\adb_usb.ini"
  > type "%USERPROFILE%\.android\adb_usb.ini"
  0x0451

• 開啟".\Android\android-sdk\extras\google\usb_driver\android_winusb.inf"
• 找尋[Google.NTx86] (若為64bit的，找尋[Google.NTamd64])，鍵入以下指令

  ; OMAP-3/4
  %SingleAdbInterface% = USB_Install, USB\VID_0451&PID_D101
  %CompositeAdbInterface% = USB_Install, USB\VID_0451&PID_D102&MI_01
  %CompositeAdbInterface% = USB_Install, USB\VID_0451&PID_D106&MI_02
  %CompositeAdbInterface% = USB_Install, USB\VID_0451&PID_D107&MI_03
  %SingleAdbInterface% = USB_Install, USB\VID_0451&PID_FFFFE
  %CompositeAdbInterface% = USB_Install, USB\VID_0451&PID_FFFE&MI_01
  %SingleAdbInterface% = USB_Install, USB\VID_0451&PID_D022
  %CompositeAdbInterface% = USB_Install, USB\VID_0451&PID_D022&MI_01
  %CompositeAdbInterface% = USB_Install, USB\VID_0451&PID_D10A&MI_01
  
  ; OMAP-3 / 4 - ICS
  %CompositeAdbInterface% = USB_Install, USB\VID_0451&PID_D109&MI_01

• 將Pandaboard的USB與PC接上

• 開啟控制台的裝置管理員，會看到一個打問號的device(OMAP或Panda之類的)

• 點選右鍵來更新驅動程式 (路徑：.\Android\android-sdk\extras\google\usb_driver)
  
• 安裝完後重開機，成功的話
  

Reference: OMAPPedia